ACV LFB Mercedes/Smart/VW ISO/10Pin ISO/Mini ISO/40Pin Quadlock

Product information ACV LFB Mercedes/Smart/VW ISO/10Pin ISO/Mini ISO/40Pin Quadlock

Keep the original steering wheel remote control functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment and the range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.
Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel remote control for functionality.

For the following vehicles suitable:

Mercedes

• Mercedes A-Class (C169/W169) 10/2004 - 04/2008
• < span>Mercedes A-Class (C169/W169) 06/2008 - 06/2012
• Mercedes B-Class (T245) 07/2005 - 04/2008
• Mercedes B-Class (T245) 04/2008 - 09/2011
• Mercedes C-Class (W203) 03/2000 - 01/2005
• Mercedes C-Class (CL203/S203/W203) 02/2004 - 09/2007
• Mercedes C-Class (C204/S204/W204) 08/2007 - 01/2011**
• Mercedes C-Class (C204/S204/W204) 03/2011 - 10/2015**
• Mercedes Citan 420 (W420) 10/2021 - 2024
• Mercedes CLC Class (CL203) 06/2008 - 02/2011
• Mercedes CLK Class (C208) 07/1999 - 03/2003
• M ercedes CLK class (C209) 03/2002 - 05/2005
• Mercedes CLK-Class (W209) 04/2005 - 01/2010
• Mercedes CLS-Class (C219) 04/2008 - 09/ 2010
• Mercedes E-Class (W210) 06/1999 - 12/2002
• Mercedes E-Class (S211/W211) 03/2008 - 01/2009
• Mercedes E-Class (A212/C212/S212/W204) 02/2009 - 03/2013**
• Mercedes G-Class (W463) 04/2007 - 06/2008
• Mercedes G-Class (W16 4) 09/2008 - 06/2012
• Mercedes GL-Class (X164) 09/2006 - 05/2009
• Mercedes GL-Class (X164) 05/2009 - 07/2012
• Mercedes M-Class (W164) 07/2005 - 04/2008
• Mercedes M-Class (W164) 10/2008 - 07/2011
• Mercedes ML (W164) 07/2005 - 04/2008
• Mercedes ML (W164) 10/2008 - 07/2011
Mercedes R-Class (W251) 09/2005 - 05/2007
• Mercedes R-Class (W251) 05/2007 - 05/2010
• Mercedes SL-Class (R230) 08/2001 - 02/2006
• Mercedes SLK Class (R171) 04/2008 - 03/2011
• Mercedes SLR (C199) 13/2003 - 12/2009
• Mercedes Sprinter (W906) 04/2006 - 08/2013
• Mercedes Sprinter (W906) 08/2013 - 05/2018
• Mercedes Sprinter (W907/W910) 06/2018 - 12/2020*/***
• Mercedes Sprinter (W907/W910) 11/2019 - 2024*/***
• Mercedes Vito/Viano (W639) 04/2006 - 08/2010
• Mercedes Vito/Viano (W639) 09/2010 - 03/2014
• Mercedes Vito (W447) 10/2014 - 02/2019*/**/ ***
• Mercedes Vito (W447) 05/2019 - 2024*/**/***

Smart

• Smart For Four (W454) 01/2004 - 04/2007

VW

• VW Crafter I (2EC/2EK/2F) 03/2006 - 07/2011
• VW Crafter I (2EC/2EK/2F) 07/2011 - 11/2016**

The following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in terms of functions.

• pink: +12V ignition terminal 15 1.5A max.
• orange: +12V lighting terminal 58 0.1A max.
• white: +12V reversing signal 1.5A max.
• yellow/green yellow/red: speed signal

Steering wheel remote control

• *Vehicles with E-Call > Article: 1424-27-0
• **Vehicles with +12V continuous current switch-off function  > +12V permanent power connection terminal 30 battery protected
• ***Vehicles with Audio 10 OEM device only support loud/quiet function
• ***Code vehicle to Audio 15 OEM device if possible
• ****Clock setting not supported > Vehicles to Audio 10 / Audio 20 OEM device code if possible 

Connection cable for the following radio manufacturers:

• Multilead various devices: 42arc100
• Alpine 3.5mm jack connection: 42arc101
• Blaupunkt 2010> 3.5mm jack connection: 42arc107
• Blaupunkt 2010> Key1 / Key2 / (GND) connection: 42arc000
• China HU Key1 / Key2 / (GND) connection: 42arc000
• Clarion 3.5mm jack connection: 42arc104
• Digital Dynamics single cable connection: 42arc108
• ESX Key1 / Key2 connection: 42arc000
• JVC 3.5mm jack connection: 42arc104
• JVC single cable connection: 42arc105
• Kenwood single cable connection: 42arc105
• Kenwood 2017> 3.5mm jack connection: 42arc107
• Kenwood 2020> Key1 / Key2 / GND connection: 42arc000
• Pioneer 3.5mm jack connection: 42arc107
• Snooper Key1 / Key2 connection: 42arc000
• Sony 3.5mm jack connection: 42arc107
• XZent single cable connection: 42arc108
• Zenec single cable connection: 42arc108

General Installation instructions

Check:

1: Check all operating functions and vehicle setting functions of the OEM device
2: Dismantle the OEM device without power supply
3: Check all interface connections for correctness and continuity without power supply

Connection and connection sequence:
1: Make settings and hardware configuration of the interface without power supply
2: Check configuration of the radio connection cable
3: Connect the radio connection cable according to the operating instructions for the retrofit device
4: Connect all other connections according to the operating instructions for the retrofit device
5: Connect the entire installation to the vehicle with the live connection last
6: Software configuration of the interface according to the instructions in the article text and in the BDA
7: Configuration of the retrofit device according to the operating instructions for the retrofit device steering wheel remote control/camera/FSE/antenna phantom power and others
8: Function test of steering wheel remote control and vehicle

Changes to the hardware configuration of the interface and the radio connection cable:
1: Make changes without power supply
2: Connect after change see above 5 to 8

If the interface or the vehicle malfunctions:
1: Revert to the OEM device
2: Operate the OEM device
3: Establish CAN bus rest
4: Check the hardware configuration of the Interfaces
5: Connection after CAN bus rest, see above 5 to 8

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.

Other connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes may only be carried out by trained specialist personnel
2: Connections and changes must be checked before connection for any manufacturer approvals or for any manufacturer warranty conditions that may be affected by the changes
3: Connections and changes must be checked before connection for function and correctness by measuring and comparing them with the vehicle's cable assignment plan
4: Connections and changes are made at your own risk and without guarantee of function
5: Connections and changes are made at your own risk and without guarantee of damage to the vehicle, the retrofit device or the interface
6: Changes to the pre-assembled wiring harness may invalidate the warranty. the guarantee of the product