Ampire VIPER 3106V - Alarmsystem mit zwei 7146V Fernbedienungen

The legendary VIPER alarm system 3106V is the best-selling car alarm system in the world and was developed in the USA. The VIPER 3106V is the ideal entry-level alarm system for vehicles without remote control or for vehicles that are to be secured via a separate remote control.

Auto alarm system with ZV control
Of course you can also lock the central locking by arming the alarm system.

Central locking control (200mA)
The outputs for controlling the central locking system can be used to remotely control almost every factory ZV. Data bus-controlled systems can also be remotely controlled or complete servomotors can be retrofitted via optional CAN bus modules or relays. We recommend using the optional 451M relay.

Two AUX accessory channels (200mA)
With the radio remote control, other functions, such as the electric trunk, can be remotely controlled on the car from over 50 meters.

Clone-Safe® code hopping alternating coding
The signal from the remote control cannot be copied (cloning) and changes the send code (code hopping) each time the button is pressed.

2-zone Stinger® shock sensor
The shock sensor integrated in the alarm center reacts to bumps or parking bumps absolutely free of false alarms. It can be calibrated to any vehicle and any desired sensitivity.

6-tone Revenger® neodymium siren
The extremely loud siren is unmistakable with 121dB / 1m sound pressure and can be installed anywhere due to its small dimensions.

Control of the turn signals (onboard XCR relay)
The VIPER 350PLUS can control the turn signals from the car to optically report an alarm. In addition, the indicators flash briefly when arming and disarming.

Starter interrupt relay
The included starter interruption relay can disconnect a line in the vehicle that reliably prevents the engine from starting.

Control of the interior light (200mA)
The lamp in the vehicle interior can be controlled via this output. As a result, the interior is already illuminated when de-emptying or flashes alternately with the turn signals in the event of an alarm to attract more attention.

Activation of the comfort lock
If your vehicle has a convenience lock, i.e. the locking of the windows via the central locking system, this can also be controlled.

NPC® anti-false alarm technology
A professionally installed VIPER will never trigger a false alarm. Should an alarm zone trigger an alarm several times, the VIPER automatically switches it off and the vehicle remains protected.

Control center with antenna
The VIPER control center is the perfect combination of receiving antenna, receiver, status LED and service button in one unit. It enables easy installation and perfect operation.

Electronic programming via ESP interface or by hand
You can make all settings using the service button. The professional makes this faster and more detailed electronically via the ESP interface with the optional bit writer

Multiplex alarm input for optional sensors (e.g. the MS508 radar sensor)
You can adapt the VIPER to your needs with additional sensors. The multiplex input is open for your extensions. If your sensor does not have a suitable connector, you need the optional cable 8292.

Alarm input for bonnet / trunk
The trunk contact and the alarm contact for the bonnet are connected to the immediate alarm input.

Alarm zone diagnostics for each alarm input
Every function of the VIPER is constantly monitored. For example, an open door when sharpening is immediately reported as an error.

Two 4-button 7146V radio transmitters
You operate the VIPER comfortably from a range of up to 100m by remote control.

E approval number: e11 10R-035487
Of course the VIPER is approved and checked.

NOTICE ROLLING CODE
This product is protected from so-called replay attacks by the rolling or change code process. All control signals between this product and the VIPER alarm center are individualized and therefore cannot be reproduced by unauthorized third parties. This method of protection against manipulation by third parties exceeds the requirements of the safety standard DIN EN 50131-1 grade 2.

NOTICE ON EQUIPMENT
Depending on the vehicle type and equipment, additional costs for assembly, adaptations and data bus modules may arise if you want to control the vehicle or start it remotely.

BATTERY REGULATION
Batteries do not belong in household waste.
The Battery Act also applies to batteries installed in other products or added to other products in accordance with 1 (1) sentence 2 of the Battery Act. As a consumer you are legally obliged to return used batteries. You can return your old batteries to the public collection points in your community or wherever batteries of the type in question are sold. You can return free of charge your batteries in the shipment. If you want to make use of the last-mentioned option, please send your old batteries freely to our address (prepaid deliveries will be rejected).
You will find these symbols on batteries and accumulators containing harmful substances:
- Pb = battery contains lead
- Cd = battery / accumulator contains cadmium
- Hg = battery contains rechargeable mercury

ADDITIONAL SEARCH TERMS
- Viper 3105V, 3105v
- Viper 3106V, 3106v