Ampire WFS200-24V - transponder immobilizer

The WFS200-24V transponder immobilizer from Ampire is the perfect product to protect vehicles, construction machines, excavators and agricultural machinery from theft and unauthorized use. Up to 30 transponders can be programmed into the WFS200, enabling optimal use in a large fleet of different vehicles and machines with a large number of users. The transponders are extremely robust and waterproof. The contactless disarming by bringing the transponder closer to the antenna enables convenient and hidden installation in any vehicle.

Construction

• ultra-compact SMD technology 
• high-load relay NHG (or equivalent) 
• break-proof polycarbonate housing 
• extremely robust and waterproof transponders

Immobilization

• 2-way immobilizer 
• Automatic self-arming 
• Relays can be loaded with max. 15 amps at 24 VDC
• Interruption 1 (Normally Closed) for the fuel pump 
• Interruption 2 (Normally Closed) for starter cable 
• black safety wiring

Transponder

• Transponders are maintenance-free and do not need batteries 
• additional transponders can be programmed using the 5-digit PIN code 
• the system can programme up to 30 different transponders
• the system can delete individual transponders if lost 
• the system can be deactivated in an emergency using the 5-digit PIN code 
• 10 billion different codes possible 
• Range test for optimal position of transponder and deactivation coil 
• Operating frequency of the TIRIS reader and transponder is 125 KHz 
• Range of the transponder 6-12cm 
• SOKYMAT transponder in IP40 housing
• Vibration test of the transponder according to EN 60068-2-6 :2008
• Shock test of the transponder according to EN 60068-2-27 :2009
• Operating temperature of the transponder -25 to +85 degrees Celsius

Scope of delivery

• Immobilizer electronics
• two RFID transponders WFST
• Cable harness
• German/English instructions
• Warning sticker for the car window

Technical data

• Operating voltage 24 VDC 
• Current consumption (armed state): less than 10 mA 
• Current consumption (disarmed state): less than 50 mA
• Relay load capacity 15A/24 V 
• Buzzer load capacity (PIN11) 30mA 
• LED load capacity (PIN10) 5mA 
• Status load capacity (PIN13) 20mA 
• Horn load capacity (PIN12) 20mA 
• Operating temperature -30° to 85°C
• Ignition input impedance (PIN15) 4.7kohm
• Switch input impedance (PIN14) 20kohm
• 10-pin main wiring harness with black cables and paper label for identification 
• including two separate ground cables 
• E-approval number: E20-97RI-01 2293