Ampire BTR300-HD - Bluetooth receiver

Product information Ampire BTR300-HD - Bluetooth Receiver

If you want to be able to listen to your music, audio books or navigation from your Apple iPhone or Android smartphone wirelessly via Bluetooth in maximum sound quality in the car, then the Bluetooth receivers from the BTR series with aptX(TM) are the solution.
You can retrofit wireless A2DP Bluetooth audio streaming to most navigation and car radio systems with the Bluetooth receiver from Ampire.
The connection is easy to set up and is automatically restored via Bluetooth® 5.0. The BTR series uses the Bluetooth protocol for headphones on your smartphone and does not affect the functionality of your Bluetooth® hands-free system.
The BTR300-HD Bluetooth receiver has been developed for navigation and car radio systems with a 3.5mm jack input and power supply via USB-A.

Listen to Bluetooth in CD quality with aptX(TM)?

As an alternative to standard Bluetooth, we also have receivers with the Bluetooth aptX(TM) codec.
This codec is becoming increasingly popular. If you use devices with the aptX standard, you can significantly increase the sound quality of your Bluetooth® streams.

What does Bluetooth aptX(TM) improve?

The aptX codec uses a more efficient method for compressing audio data, which makes better use of the available bandwidth.
The prerequisite for aptX(TM) streams is that the playback device and the transmitter also support Bluetooth aptX(TM).
The function can be recognized by the aptX lettering on the device. The codec supports common audio formats such as MP3 and FLAC.

Which smartphones support Bluetooth aptX(TM)?

Not all Android smartphones support the Bluetooth aptX(TM) codec.
You can check the technical data of your Android smartphone to see whether it is compatible.
An Apple iPhone does not support the Bluetooth® codec aptX(TM) in principle.

CONNECTIONS:

• Audio output: 3.5mm jack plug
•  Power supply: USB input (5 VDC)

EQUIPMENT:

•  splash-proof, marine certified
• automatic switch-on
•  QDL licensed Bluetooth 5.0
•  A2DP in the highest EDR Specification
•  aptX(TM) audio codec from Qualcomm
•  BT audio streaming of lossless files such as Wave, Flac, Lossless, etc.
•  3.5mm jack plug with signal output 1.0V
•  SSID display name: BTR300X
•  10m range

SMARTPHONE COMPATIBILITY

•  Android (Bluetooth and Bluetooth aptX(TM))
•  Apple iOS (Bluetooth)

OPTIONAL ACCESSORIES

• 55100-JACK AMPIRE interference filter

TECHNICAL DATA:

•  Voltage: 5 Volt DC
•  Current consumption: <45mA
•  Bluetooth 5.0
•  aptX(TM) audio codec from Qualcomm
•  Frequency range: 20Hz-20kHz
•  Encoding: Low Complexity Subband Codec (SBC)
•  Bitrate: up to 384 kbps (48 kHz sampling)
•  Audio output voltage: 1V RMS
•  Bluetooth 4.0 / transmit power <10mW EIRP and aptX
•  Cable length: 300mm
•  Dimensions of the housing: height: 20mm, width: 65mm, length: 50mm

BLUETOOTH APPROVAL:

•  Declaration ID D068331
•  Referenced Qualified Design ID 173056
•  Listing Date 2024-04-18

LEARN DEVICE:

• - make sure that Bluetooth is switched on on your device
• - switch on the ignition
• - the LED (6) flashes blue (pairing mode)
• - to connect, select BTR300X in the Bluetooth menu of your device off
• - after a successful connection, the LED lights up permanently and a single beep sounds over the audio system

NOTE:

•  up to 9 devices can be connected to the BTR300X, but only one device can stream music at a time
•  the BTR300X always remembers the last device that was paired and connects automatically after switching on
•  a connection to another device must be made manually, as described above
•  if the connected device is out of range for more than a minute, the connection is automatically interrupted and the BTR300X goes into pairing mode [the LED (6) flashes]
•  can only be used in vehicles and not in continuous operation

OPERATION:

•  all settings, such as volume, music selection and play/pause, are made on your device
•  the BTR300X can be installed out of sight because it has no controls or buttons that need to be operated.