Ampire CPM103 - Smartphone monitor 25.4cm (10'') with AHD dashcam and RFK input (AHD)

Would you like to retrofit Apple CarPlay or Android Auto to your factory car radio without a monitor?
Then the CPM103 smartphone monitor is exactly the right product.
This high-resolution 10'' touchscreen monitor allows you to integrate your smartphone in almost any vehicle and also display an optional rear view camera.
Our CPM103 smartphone monitor with integrated smartphone interface is compatible with wireless Apple CarPlay and Android Auto (please note the minimum requirements) and is therefore an intelligent and safer way to use your smartphone in the car.
Everything is operated via the intelligent voice control Siri or OK Google or on the 10" touchscreen monitor, which you can securely attach to the dashboard, for example, with the included foot holder.
Everything you want to do with your smartphone while driving can be done directly on this monitor with Apple CarPlay or Android Auto.
You can easily get directions or send and receive messages. If your vehicle has a factory wireless hands-free system, you can operate it and use it to make phone calls using our smartphone integration.
While navigating, you can listen to your favorite music, for example via Spotify, or your favorite station via a radio app - and still concentrate on the road.
Simply connect your smartphone wirelessly to our monitor via WLAN and off you go.
The sound is fed in via the audio AUX input (3.5mm jack plug) of your factory car radio.
If your vehicle has factory A2DP audio streaming, you can also send the sound of the CPM103 directly to your radio via radio without detours and without any loss of quality. Alternatively, an FM transmitter is also integrated, which can send the sound as an VHF signal and be received by your car radio.
There is also a small speaker integrated into the housing that can play back navigation messages, for example.

Technical data
Display:

•  10" IPS LCD touch screen monitor
•  9.2" / 23.4cm visible diagonal
•  Aspect ratio 24:9
•  Touchscreen operation
•  Adjustable LED backlight
•  Extremely high resolution of 1600 x 600
•  Brightness 750cd/m²
•  Contrast 1000:1
•  Clock frequency 60Hz
•  Vertical viewing angle 130°
•  Horizontal viewing angle 150°
•  Our monitors are subject to ISO 9241-307, pixel error class II

SMARTPHONE INTEGRATION
Wireless Apple CarPlay

• Minimum requirement: iPhone 5 and higher.
• The CPM103 can only be used wirelessly with Apple CarPlay. and not connected via a USB cable.

Wireless Android Auto

• Minimum requirements: Android 11, Android Auto 4.8 and Wi-Fi 5GHz*
• *IEE Standards 802.11a, 802.11ac, 802.11ax, 802.11be & 802.11n
• ATTENTION! Devices that only have WLAN 2.4GHz are not supported and are not compatible!
• The CPM103 can only be connected to Android Auto wirelessly and not via a USB cable

Pair your smartphone with the CPM103 and then connect your smartphone to the A2DP of your car radio.
The CarPlay or Android Auto sound is then sent directly and without detours from your smartphone via A2DP to the car radio*.
(*An A2DP-capable car radio is required.)

AHD Dashcam
Integrated front camera on the back of the monitor

•  AHD (Analog High definition), not compatible with CVBS
•  1080p (1920 x 1080 pixel resolution)
•  25 FPS frame rate
•  Viewing angle: 120° horizontal, 145° diagonal

Recorder

•  Recording resolution: 1080p+1080p or 720p+720p (adjustable)
•  Segment length: 1 minute, 3 minutes, 5 minutes
•  Audio recording can be switched on
• Parking mode with motion detection and Time-lapse recording. 12h or 24h adjustable, undervoltage protection at 11.8V
•  Memory card type: microSD (not included)
•  microSD speed class: Class 10 or higher
• microSD storage capacity: min. 32GB to max. 256GB
•  Recording capacities: 32GB approx. 4.5 hours, 64GB approx. 9.5 hours, 128GB approx. 19 hours, 256GB approx. 38 hours, then the oldest recordings are overwritten.
•  Switch-on delay (ACC ON): 17 seconds
•  Switch-on delay in parking mode: 0 seconds
•  Switch-off delay (ACC OFF): 15 seconds

REAR VIEW CAMERA INPUT (AHD)

•  12 volt switching input for activation
•  Immediate switching to the system rear camera in full screen with guide lines when reverse gear is engaged
•  Guide lines can be individually adjusted
• Switch-off delay of 3 seconds when disengaging reverse gear
•  The dashcam recording function is not activated in rear view camera mode interrupted
• Image display can be set to normal/mirrored
•  AHD (Analog High Definition)
•  1080p (1920 x 1080 pixel resolution)
•  25 FPS frame rate
•  Viewing angle: 100° horizontal, 60° vertical, 120° diagonal
• 4P MINI-DIN system connector

AUDIO OUTPUT

•  Stereo audio output with 3.5mm Jack cable
•  A2DP audio streaming of all CarPlay and Android Auto content directly from your smartphone. No additional app required.
•  FM transmitter for alternative sound reproduction (87 - 108 MHz.)
•  integrated 2 watt speaker with its own housing

OTHER

•  LINUX 4.9 OS operating system with 1GB memory
•  Apple CarPlay and Android Auto in full-screen mode, or in half-screen mode with simultaneous display of a camera (selectable)
• SD card reader (Mirco SD)
•  USB-C input for power supply
•  USB-C cable power supply with ACC ignition logic
•  Menu languages: DE, EN, FR, ESP, RU, JPN, CN, KOR
• Automatic switch-on when operating voltage is applied
• Operating voltage 9V - 36V DC
•  Power consumption ACC ON: 600mA@12VDC
• Power consumption ACC OFF: 8.1mA@12VDC
•  Power consumption in parking mode: 290mA@12VDC
• Operating temperature: -20° to 70°C
• Storage temperature: -30° to 80°C
•  Dimensions monitor (without base): 240 x 100 x 33mm (42mm with front camera)
•  Weight of monitor with base: 518g

SCOPE OF DELIVERY

•  10" (25.4cm) touchscreen monitor
•  Foot mount
• USB-C connection cable for power supply with +12V, ground and ignition (ACC), 320cm
•  Connection cable for System rear camera,  700cm
•  Connection cable audio output (3.5mm jack), 120cm