ACV 621250-21-1 - 2-DIN kit for Dacia Duster(SR), 09/2021-2024 LFB analog/antenna

Radio panel 2-DIN with radio connection kit steering wheel remote control Dacia

Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console.
Installation kits contain all components for replacing an OEM device.
Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and to restore vehicle functions are included in the scope of delivery.
Please note the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call or other driver assistance systems.
Before installation, check the vehicle menu for various settings.
Before final assembly, check vehicle functions, vehicle settings and steering wheel remote control for functionality.
Make sure that the original Factory radios and the adapter plug shown match the equipment of the vehicle.

Suitable for the following vehicles:

• Dacia Duster (SR) 09/2021 - 2024

Color:

•  black

Installation cutout radio display: 

• 172mm x 98.5mm

The following signals are available provided:

Reimported vehicles or vehicles with different software may be functionally incompatible.

• Steering wheel remote control 

Scope of delivery:

• 2-DIN radio panel Dacia Duster (SR) 2021-2023 > Article: 381250-21-1
• LFB Dacia Duster 09/2021-2023 20Pin/32Pin Nissan analog loose> Article: 42sdc015
• LFB cable 42s/acv > Multilead various devices/Pioneer 2022 loose > >  Article: 42ctmultilead3
• Antenna adapter Fakra(m)>DIN(m) 12V Phantom loose > Article: 1524-03

General installation instructions:
Check:

1: Check all operating functions and vehicle setting functions of the OEM device
2: Dismantle the OEM device without voltage
3: Check all interface connections for correctness and continuity without voltage

Connection and connection sequence:

1: Make the settings and hardware configuration of the interface without voltage
2: Check the configuration of the radio connection cable
3: Connect the radio connection cable according to the operating instructions for the retrofit device
4: Connect all other connections according to the operating instructions for the retrofit device
5: Connect the entire installation to the vehicle with a live connection last
6: Configure the software of the Interfaces according to the instructions in the article text and in the BDA
7: Configuration of the retrofit device according to the operating instructions for the retrofit device steering wheel remote control/camera/FSE/antenna phantom power and others
8: Functional test of steering wheel remote control and vehicle

Changes to the hardware configuration of the interface and the radio connection cable:

1: Make changes without voltage
2: Connection after change see above 5 to 8

If the interface or the vehicle malfunctions

1: Revert to the OEM device
2: Operate the OEM device
3: Establish CAN bus rest
4: Check the hardware configuration of the interface
5: Connection after CAN bus rest see above 5 to 8
In the information text or the operating instructions specified connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables are intended solely for orientation and information purposes for trained specialist personnel.

Other connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:

1: Connections and changes may only be carried out by trained specialist personnel
2: Connections and changes must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the changes before connection
3: Connections and changes must be checked for functionality and correctness before connection by measuring and comparing them with the vehicle's cable assignment plan
4: Connections and changes are made at your own risk and without guarantee of functionality
5: Connections and changes are made at your own risk and without guarantee of damage to the vehicle, the retrofit device or the interface
6: Changes to the pre-assembled wiring harness may void the product's warranty