Zenec ZE-RVSC150MV - Multiview rear view camera for motorhomes

The ZENEC ZE-RVSC150MV "Multiview" reversing camera was developed for partially and fully integrated motorhomes. The Pixelplus PC1058C CMOS image sensor enables an image resolution of 700 TV lines with high light sensitivity.

The technical feature of this reversing camera model is the multiview display mode. The multiview function allows direct manual control of the desired image view on the ZENEC device by tapping one of the six camera views on the device's touchscreen.
When reverse gear is engaged, the ZE-RVSC150MV automatically switches to normal mode for monitoring the behind the vehicle for safe maneuvering and parking.

I changed the sentence, reads better, if not, capitalize maneuvering and parking...
To enable safe maneuvering and parking, the ZE-RVSC150MV automatically shifts to down when reverse gear is engaged pointing normal mode for monitoring the area behind the vehicle.

More manually selectable image modes are used to monitor the corner area of the vehicle, or to observe the traffic behind the vehicle while driving ("digital rear-view mirror" function).
Also a bit changed:
More manually selectable image modes are used for monitoring the corner area of the vehicle or for observing the traffic situation behind the vehicle while driving ("digital rear view mirror" function). in the feature list) that require a hole diameter of 6.1 mm for the cable entry.
The ZE-RVSC150MV is compatible with ZENEC device models that indicate "compatible with ZENEC Multiview camera models" in the functional description.

Key Features

• Compact, universal "Multiview" reversing camera for use with selected Multiview control-capable ZENEC device models
• Multiview function with six camera image display modes that can be selected via the touchscreen of the ZENEC device (normal, top-down, panorama, L/R blind spot, two-split screen, three-split screen)
• High quality, low power consumption CMOS image sensor
• IR LED lighting with 5 LEDs and dynamic brightness control via LDR element
• Robust white painted die-cast aluminum housing with mechanical adjustment of the vertical image section
• Protection class IP68 certified

Technical specifications

• Image Sensor: 1/3” / 8.51mm Pixelplus PC1058C CMOS Sensor
• Horizontal viewing angle: 180° (max.), image sections controllable via ZENEC device
• TV system: NTSC / 30fps
• Effective sensor image resolution: 960 (H) x 576 (V) pixels
• Video output signal resolution: 700 TV lines
• Frame rate: 30 fields/sec
• Signal to noise ratio: 43.3 dB
• Light sensitivity: 1.0 lux, 0 lux with IR-ON
• Video output: 1.0 Vp-p (+/- 0.2 V) 75 ohms, CVBS
• White balance: automatic
• Exposure compensation: automatic
• Gain control (AGC): automatic
• Synchronization: automatic
• Power supply: 5.5 - 12 V DC
• Power consumption (@12VDC): 1200 mW (220±5 mA@5.5 V via step-down converter)
• Protection class: IP68
• Operating temperature: -20°C ~ +70°C
• Dimensions L x W x H: 74 x 54 x 44 mm