Ampire LDS-A6-CP - Smartphone integration Audi MMI, MIB2, RMC

Ampire smartphone integration Audi MMI, MIB2, RMC

Plug&Play smartphone interface with complete integration into your car's multimedia system. The image playback is shown on the factory monitor and the audio playback via the audio AUX input. Of course, the interface is suitable for Apple CarPlay and Android Auto, making it an intelligent and safer way to use your smartphone in the car.

Everything is operated using the vehicle's own buttons and operating systems. In Apple CarPlay mode, you can also use Siri voice control via the supplied microphone. Everything you want to do with your smartphone while driving can be done with Apple CarPlay® and Android directly on the car's display. You can easily get directions, make phone calls, send and receive messages or listen to music - and still concentrate on the road. Simply connect your smartphone to our system and off you go.

Features

• Interface for retrofitting Apple CarPlay and Android Auto
• Operation via OEM buttons/touchpad from the vehicle
• Wireless Apple CarPlay via WIFI antenna
• Wired Apple CarPlay via USB (switch off WiFi on the iPhone)
• Android Mirrorlink function (mirroring the smartphone display)
• USB input for multimedia playback
• Video playback on Apple iOS only via USB cable
• Up to 1080p HD resolution for multimedia playback
• Supports RMVB, MOV, MKV, MP4, AVI, RM
• Pairing via Bluetooth only necessary for initial installation
• Integrated audio DSP with Equalizer
• Analog audio output with 3 volt output voltage for sound playback (Audio AUX)
• Supports left and right hand drive vehicles
• Software update possible via a micro USB input (adapter included)
• Apple Siri voice control via supplied microphone (no telephony via this)

Apps

• GPS navigation with Google Maps, Waze and Apple Maps and much more.
• Music playback with Spotify, Apple Music, Amazon Prime and much more.

Camera functions

• Input for front camera (composite video)
• Input for rear view camera (composite video)
• Support for reversing alarms (PDC)
• Support for moving guide lines
• Supports 360° camera systems
• 12 volt output for powering the front camera
• 12 volt output for powering the rear camera

Accessories

In the scope of delivery we send you an adapter from MICRO-USB to USB for possible software updates of the interface.

Vehicle compatibility

Before purchasing and installing, check whether the product is compatible with your car type, year of manufacture and entertainment system. Your entertainment system must have an audio AUX input for sound playback. Incompatibility can lead to damage.

Smartphone compatibility

Before purchasing and installing, check whether the product is compatible with your smartphone.

• Apple iOS: iPhone 5 and higher
• Google Android: Android 5.0 (Lillipop) better Android 6.0 (Marshmallow) and higher.

Technical data 

• Charging current of the USB port: 1100mA
• Interface dimensions: 166x89x27mm
• Packaging dimensions: 260x220x80mm

Approvals

• E-approval number E57*10R06/00*0081
• E-approval number E57*COP*0279

Important product information

The MEDIA IN socket on the housing is not an HDMI input for playing back external HDMI sources. This socket is required for additional modules in some vehicle types.

Installation note 

This product is used in vehicles with a 12V battery. Please do not install in vehicles with a different voltage. Never extend the HSD signal lines. This product consists of high-precision parts and should therefore not be subjected to strong impacts. Never open the housing. To protect driving safety and avoid violations of traffic laws, never operate the product while driving. The optional rear view cameras are only visible when maneuvering. In addition, always pay attention to your surroundings and never rely solely on the camera. All installation steps should only be performed by a trained professional. During installation, the ignition must be turned off and the product must not be connected to power until the wiring is complete. NEVER plug or unplug the cables when the power is on to avoid damaging the monitor or the product. Route the cables so that they do not come into contact with metal edges. This may damage the wiring, which may result in fire. Avoid any contact with hot surfaces when wiring the main unit. High temperatures can damage the wiring and cause short circuits, arcing and fire. Please DO NOT install the product in a humid environment to avoid electric shock, damage and fire caused by a short circuit. When you receive the product, please check that all components are in the packaging. If anything is missing, inform the supplier / manufacturer. Start the engine before loading, check the interface to see if the function is displayed, check the key to see if the vehicle interface is working correctly. Please provide feedback to the supplier / manufacturer if you have any questions. Please note that you should handle the disassembled vehicle parts carefully during installation and avoid scratches on the instrument panel. Unused connectors must be insulated to avoid short circuits. The cable connections should be well inserted. Avoid interference with control components such as the steering wheel, accelerator and brake pedals.

Legal Notice

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Third-party products and brand names may be registered trademarks of their respective owners.