ACV 42sdg003 - LFB for Dodge Dart/RAM to 52Pin

Steering wheel remote control adapter Dodge

Keep the original steering wheel remote control functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment and the range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.
Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel remote control for functionality.

Suitable for the following vehicles:

• Dodge Dart 2013 - 2016*
• Dodge RAM 2013 - 2021*
• Dodge RAM Promaster 2013 - 2021**
• Dodge RAM Promaster-City 2015 - 2021

The following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in terms of functions.

• red: +12V ignition terminal 15
• orange: +12V lighting terminal 58
• purple/white: +12V Reverse signal
• pink: speed signal
• green: ground GND handbrake signal
• Total output load capacity: 100 mA max.
• Current requirement greater than 100 mA:
• 1 relay coil resistance 75 Ohm min.
• 2 relays coil resistance 150 Ohm min.
• Steering wheel remote control

*Vehicles with small monitor
**Vehicles with 5" OEM monitor
 **Vehicles with OEM navigation