Product information NAVLINKZ video feeder AHD/FBAS/HDMI suitable for Uconnnect5 10 inches

Video feeder for rear view camera, front camera with automatic and two additional video sources. FBAS and AHD capable.
Additional HDMI input. Suitable for Alfa Romeo Tonale, Fiat 500 and 500e, Ducato3 (Series 8) and Tipo and Jeep Compass with Uconnect and 10 or 10.25 inch tablet monitor.
Product features

• Video feeder for factory infotainment systems
• 1 CVBS/AHD input for rear view camera
• 1 CVBS/AHD input for front camera
• 2 CVBS/AHD inputs for side cameras or other retrofit devices (e.g. USB devices, DVB-T2 tuners, etc.)
• All inputs NTSC and PAL compatible
• Supported AHD resolutions 720p NTSC (30Hz), 720p PAL (25Hz), 960p NTSC (30Hz), 960p PAL (25Hz), 1080p NTSC (30Hz), 1080p PAL (25Hz)< /li>
• 1 HDMI input for HD rear view camera or other HDMI source (e.g. iOS/Android device, laptop, streaming stick, DVB-T2 tuner, etc.)
• Automatic switching to rear view camera input in reverse gear
• Automatic front camera switching after reverse gear for 5, 10, 15 or 20 seconds
• Route lines can be activated for the rear view camera (not available for all vehicles)
• Image free while driving (ONLY for fed video sources)

Compatibility

• Alfa RomeoTonale (965) from 05/2022Connect 10.25 inch or Connect NAV 10.25 inch - (R1 INT ER) with ultra-wide tablet monitor with separate head unit
• FiatDucato3 (Series 8) from model year 2021, Uconnect5 R1 EXT ER with 10 inch tablet monitor with separate head unit
• FiatTipo (356) from model year 2023Uconnect5 R1 EXT ER with 10 inch tablet monitor with separate head unit
• Fiat500, 500e from 11/2020Uconnect5 R1 INT ER with 10.25 inch ultra-wide tablet monitor with separate head unit
• JeepCompass from model year 2021Uconnect5 R1 EXT ER with 10.1 inch tablet monitor with separate head unit
• Attention: Not compatible with Jeep Compass from model year 2021 with Uconnect5 with 8.4 inch tablet monitor and all-in-one head unit.

Restrictions
CAN bus compatibilityThe CAN bus compatibility of the interface may be restricted for some vehicles entirely or for individual functions.
This can become noticeable both during installation and later.
The interface with all video inputs can be operated with analog switching signals without being connected to the vehicle CAN bus. Individual additional functions are omitted, see following.
Only VideoInterface does not feed in any audio signals. In order to feed in audio signals, a possibly existing factory audio AUX input or optional products must be used (e.g. FM modulator).
Factory rear view cameraAutomatic switching to RFK -Input only occurs as long as reverse gear is engaged. Optional accessories are required for different switching times.
After-market front camera switching to the front camera occurs automatically after disengaging reverse gear for 5, 10, 15 or 20 seconds (depending on the OSD menu setting).
Manual switching to the front camera is also possible using the external button.
Route linesIf the vehicle CAN bus is incompletely compatible with the interface, the route lines functions cannot be used.
Connections

• Image input: 4-pin HSD
• Power and CAN bus: Plug & Play (vehicle specific)
• Video inputs (2x): Cinch sockets
• Reversing camera input: RCA socket
• Front camera input: RCA socket
• Trigger lines (4x): Open cable ends
• Additional video input: HDMI
• HDMI audio output: 3.5mm jack socket

Technical data

• Operating voltage 12V DC (9~16V)
• quiescent current 7mA
• Current consumption 240mA
• Video input 0.7~1V
• Video input signal typesFBAS/AHD/HDMI
• Signal standards FBAS/AHDNTSC/PAL
• Temperature range-40°C to +85°C
• Dimensions video box 117 x 30 x 108mm (W x H x D)