ACV 42xfo002-0 - LFB Ford vehicles, 40Pin Quadlock Multilead analog loose

Steering wheel remote control adapter Ford

Keep the original steering wheel remote control functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment and the range of functions and software of the  retrofit device, individual operating functions may be omitted or replaced by other functions.
Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the original factory radios specified was installed in your vehicle.
Before Final assembly Check vehicle functions, vehicle settings and steering wheel remote control for functionality.

Suitable for the following vehicles:

• Ford C-Max (DM2) 11/2003 - 05/2007
• Ford C-Max (DM2) 05/2007 - 09/2010
• Ford Fiesta (JH1/JD3) 10/2005 - 09/2008
• Ford Focus (DA3) 11/2004 - 03/2008
• Ford Focus (DA3) 02/2008 - 03/2011
  
• Ford Fusion (JU2) 10/2005 - 07/2012
• Ford Galaxy II (WA6) 03/2006 - 04/2010
• Ford Galaxy II (WA6)05/2010 - 
• Ford Fusion (JU2) 10/2005 - 07/2012
• Ford Galaxy II (WA6) 03/2006 - 04/2010
• Ford Galaxy II (WA6)05/2010 - 
• Ford Fusion (JU2) 10/2005 - 07/2012
• Ford Galaxy II (WA6) 03/2006 - 04/2010
• Ford Galaxy II (WA6)05/2010 - 05/2015
  
• Ford Kuga (DM2) 06/2008 - 12/2012
• Ford Mondeo III (B4Y/B5Y/BWY) 06/2003 - 04/2005
• Ford Mondeo III (B4Y/B5Y/BWY)05/2005 - 06/2007
• Ford Mondeo IV (BA7) 06/2007 - 10/2010
• Ford Mondeo IV (BA7) 11/2010 - 08/2014
• Ford S-Max (WA6) 06/2006 - 04/2010
• Ford S-Max (WA6) 05/2010 - 05/2015
• Ford Transit (F**6) 07/2006 - 03/2014
• Ford Transit Connect (P*2) 06/2006 - 07/2013
• Ford Kuga (DM2) 06/2008 - 12/2012
• Ford Mondeo III (B4Y/B5Y/BWY) 06/2003 - 04/2005
• Ford Mondeo III (B4Y/B5Y/BWY)05/2005 - 06/2007
• Ford Mondeo IV (BA7) 06/2007 - 10/2010
• Ford Mondeo IV (BA7) 11/2010 - 08/2014
• Ford S-Max (WA6) 06/2006 - 04/2010
• Ford S-Max (WA6) 05/2010 - 05/2015
• Ford Transit (F**6) 07/2006 - 03/2014
• Ford Transit Connect (P*2) 06/2006 - 07/2013

The following signals are provided:

• Reimported vehicles or vehicles with different software may be functionally incompatible.
• Steering wheel remote control

General installation instructions:
Verification:

• 1: Checking all operating functions and vehicle setting functions of the OEM device
• 2: Dismantle the OEM device without applying any voltage
• 3: Check all interface connections for correctness and continuity without voltage make

Connection and Connection sequence:

• 1: Settings and hardware configuration of the interface without voltage make
• 2: Check the configuration of the radio connection cable
• 3: Connect the radio connection cable according to the operating instructions for the retrofit device make
• 4: Connect all other connections according to the operating instructions of the retrofit device make
• 5: Connecting the entire installation to the vehicle with a live connection last
• 6: Software configuration of the interface according to the instructions in the article text and in the BDA
• 7: Configuration of the retrofit device according to the operating instructions of the retrofit device steering wheel remote control/camera/FSE/antenna phantom power and more
• 8: Function test steering wheel remote control and Vehicle

Changes to the hardware configuration of the interface and the Radio connection cable:

• 1: Changes without voltage carry out
• 2: Connection after change see above 5 to 8

If the interface or the Vehicle:

• 1: Revert to the OEM Device
• 2: OEM device operate
• 3: CAN bus rest produce< /span>
• 4: Checking the hardware configuration of the Interfaces< /span>
• 5: Connection after CAN bus rest see above 5 to 8

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are intended solely for orientation and information purposes for trained personnel. Specialist personnel.

Additional connections, changes to the cable configuration of the wiring harness or use of alternative connections or Connection extensions:

• 1: Connections and modifications may only be carried out by trained specialist personnel to carry out
• 2: Before making connections and changes, check for any manufacturer approvals or manufacturer warranty conditions that may be affected by the changes. check
• 3: Connections and changes must be checked for functionality and correctness by measuring and comparing them with the vehicle's cable assignment plan before connection. check
• 4: Connections and changes are made at your own risk and without any guarantee of functionality
• 5: Connections and modifications are made at your own risk and without any guarantee for damage to the vehicle, the retrofit device or the Interface< /span>
• 6: Modifications to the pre-assembled wiring harness may void the product's warranty