Product information NAVLINKZ video feeder AHD/FBAS/HDMI suitable for PSA NAC/RCC/IVI

Video feeder for rear view camera, front camera with automatic and 2 additional video inputs.
FBAS and AHD capable, additional HDMI input. Suitable for Citroen, DS, Opel and Peugeot with NAC/RCC/IVI with 7, 10.25 or 12.3 inch monitor.
Product features

• Video feeder for factory infotainment systems
• 1 CVBS/AHD input for rear view camera
• 1 CVBS/AHD input for front camera
• 2 CVBS/AHD input for side cameras or other retrofit devices (e.g. USB devices, DVB-T2 tuner, etc.)
• All inputs NTSC and PAL compatible
• Supported AHD resolutions 720p NTSC (30Hz), 720p PAL (25Hz), 960p NTSC (30Hz), 960p PAL (25Hz), 1080p NTSC (30Hz), 1080p PAL (25Hz)
• 1 HDMI input for HD rear view camera or other HDMI source (e.g. iOS/Android device, laptop, streaming stick, DVB-T2 tuner, etc.)
• Automatic switching to rear view camera input in reverse gear
• Automatic front camera switching after reverse gear for 5, 10, 15 or 20 seconds
• Route lines can be activated for the rear view camera (not available for all vehicles)
• PDC graphics can be activated (not available for all vehicles)
• Image free while driving (ONLY for fed-in video sources)

Compatibility

• Citroen/DSC4 from 11/2020, IVI Mid, IVI High, NAC Low, NAC High or DS Connect Radio/Nav from Bosch, Continental or Harmann with 10.25 inch or 12.3 inch touch monitor at Continental High version may also require CAB-HSD-MF026
• Citroen/DSC4 Continental High Version may also require CAB-HSD-MF026
• Citroen/DSC5 Aircross from 10/2022, IVI Mid, IVI High, NAC Low, NAC High or DS Connect Radio/Nav from Bosch, Continental or Harmann with 10.25 inch or 12.3 inch touch monitor Continental High Version may also require CAB-HSD-MF026
• Citroen/DSC5 Continental High Version may also require CAB-HSD-MF026
• Citroen/DSDS3 Crossback from 12/2018, IVI Mid, IVI High, NAC Low, NAC High or DS Connect Radio/Nav from Bosch, Continental or Harmann with 10.25 inch or 12.3 inch touch monitor Continental High Version may also require CAB-HSD-MF026
• Citroen/DSDS4 from 11/2021, IVI Mid, IVI High, NAC Low, NAC High or DS Connect Radio/Nav from Bosch, Continental or Harmann with 10.25 inch or 12.3 inch touch monitor at Continental High version may also require CAB-HSD-MF026
• Citroen/DSDS7 Crossback 03/2017-2022,IVI Mid, IVI High, NAC Low, NAC High or DS Connect Radio/Nav from Bosch, Continental or Harmann with 10.25 inch or 12.3 inch touch monitor For Continental High Version, CAB-HSD-MF026 may also be necessary
• Citroen/DSDS9 11/2020-2022IVI Mid, IVI High, NAC Low, NAC High or DS Connect Radio/Nav from Bosch, Continental or Harmann with 10.25 inch or 12.3 inch touch monitor at Continental High Version may also require CAB-HSD-MF026
• OpelCorsa F from model year 2019, NAC or RCC with 10.25 inch touch monitor, Continental High Version may also require CAB-HSD-MF026
• OpelMokka B from 09/2020, NAC or RCC with 10.25 inch touch monitor, Continental High Version may also require CAB-HSD-MF026
• Peugeot208 II from 06/2019, NAC or RCC with 10.25 inch touch monitor with Bosch or Continental head unit, with Continental High version additional CAB-HSD-MF026 may be necessary< /span>
• Peugeot2008 II from 11/2019, NAC or RCC with 10.25 inch touch monitor with Bosch or Continental head unit, with Continental High version additional CAB-HSD-MF026 may be necessary< /span>
• Peugeot3008 II from 05/2021,NAC or RCC with 10.25 inch touch monitor with Bosch or Continental head unit, with Continental High version additional CAB-HSD-MF026 may be necessary< /span>
• Peugeot508 II from 10/2018, NAC or RCC with 10.25 inch touch monitor with Bosch or Continental head unit, with Continental High Version additional CAB-HSD-MF026 may be necessary< /span>
• Peugeot5008 II from 10/2020NAC or RCC with 10.25 inch touch monitor with Bosch or Continental head unit, with Continental High version additional CAB-HSD-MF026 may be necessary
• Peugeot308 III from 09/2021IVI Mid or High with 10.25 inch touch monitor with Harman head unit

Restrictions
CAN bus compatibilityThe CAN bus compatibility of the interface may be restricted for some vehicles entirely or for individual functions.
This may be the case become noticeable both during installation and later.
The interface with all video inputs can be operated with analog switching signals without being connected to the vehicle CAN bus. Individual additional functions are omitted, see following.
Only VideoInterface does not feed in any audio signals. In order to feed in audio signals, a possibly existing factory audio AUX input or optional products must be used (e.g. AUX-UNI0x, FM modulator).
Factory Rear view cameraAutomatic switching to RFK input only occurs as long as reverse gear is engaged.
For different switching times, optional accessories are required.
After-market front camera switching to the front camera occurs automatically after disengaging reverse gear for 5, 10, 15 or 20 seconds (depending on the OSD menu Attitude).
Manual switching to the front camera is also possible using the external button.
Track lines and PDCIf the vehicle CAN bus is incompletely compatible with the interface or with an analog connection, the track line and optical functions can be used PDC display cannot be used.
NAC High VersionIf the double HSD socket of the vehicle wiring harness cannot be separated into two individual HSD sockets, the optionally available cable CAB-HSD-MF026 is additional required.
Connections

• Image input: 4-pin HSD
• Power and CAN bus: Open cable ends
• Video inputs (2x): Cinch sockets
• Reversing camera input: RCA socket
• Front camera input: RCA socket
• Trigger lines (4x): Open cable ends
• Additional video input: HDMI
• HDMI audio output: 3.5mm jack socket

Technical data

• Operating voltage 12V DC (9~16V)
• Standby current approx. 3.4mA
• Current consumption 250mA
• Video input 0.7~1V
• Video input signal typesFBAS/AHD/HDMI
• Signal standards FBAS/AHDNTSC/PAL
• Temperature range-40°C to +85°C
• Dimensions video box 115 x 25 x 109mm (W x H x D)