ACV 42b-3474761 - LFB for Alfa Romeo/Citroen/Iveco Daily V/Fiat to ISO/Mini-ISO

Steering wheel remote control adapter Alfa Romeo / Citroen / Fiat / Ford RU8 / Iveco Daily / Peugeot

Keep the original steering wheel remote control functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment and the range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.
Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel remote control for functionality.

For the following vehicles suitable:

Alfa Romeo

• Alfa Romeo 147 (973) 09/2007 - 04/2010
• Alfa Romeo 159 (939) 09/2005 - 11/2011
• Alfa Romeo < span>Brera (939) 01/2006 - 10/2010
  
• Alfa Romeo GT (937) 02/2004 - 10/2010
• Alfa Rome o Giulietta (940) 05/2010 - 10/2013
• Alfa Romeo Giuletta (940) 10/2013 - 04/2016
• Alfa Romeo Giuletta (940) 04/2016 - 12/2021
• Alfa Romeo MiTo (955) 09/2008 - 10/2013
• Alfa Romeo MiTo (955) 12/2013 - 08/2016
• Alfa Romeo MiTo (955) 08/2016 - 08/2018
• Alfa Romeo Spider (939) 01/2007 - 10/2010

Citroen

Citroen Jumper (250) 10/2006 - 11/2011
Citroen Jumper (250) 11/2011 - 05/2014

Fiat

• Fiat 500 (ZAF 312) 10/2007 - 07/2015
• Fiat Bravo (ZAF 198) 04/2007 - 01/2014
• Fiat Croma (ZAF 194) 06/2005 - 09/2010
• Fiat Doblo (ZAF 263) 02/2010 - 01 /2015
• Fiat Ducato (ZAF 250) 06/2006 - 06/2011
• Fiat Ducato (ZAF 250) 06/2011 - 05/2014
• Fiat Fiorino (ZAF 225) 04/2008 - 07/2016
• Fiat Grande Punto (ZAF 199) 10/2005 - 09/2009
• Fiat Idea (ZAF 350) 11/2005 - 01/2008
• Fiat Multipla (ZAF 186) 09/2004 - 01/2008
• Fiat Panda (ZAF 169) 10/2003 - 03/2013
• Fiat Punto (ZAF 199) 05/2010 - 12/2010
• Fiat Punto (ZAF 199) 01/2011 - 01 /2012
• Fiat Punto (ZAF 199) 01/2012 - 07/2017
• Fiat Punto Evo (ZAF 199) 09/2009 - 01/2011
• Fiat Qubo (ZAF 225) 09/2008 - 07/2016
• Fiat Stilo (ZAF 192) 06/2003 - 04/2006*
• Fiat Stilo (ZAF 192) 04/2006 - 01/2008*

Ford

• Ford Ka (RU8) 02/20 09 - 05/2017

Iveco

• Iveco Daily V 2006 - 06/2014

Peugeot

• Peugeot Boxer (Y) 02/2007 - 07/2011
• Peugeot Boxer (Y) 07/2011 - 05/2014

The following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in terms of functions.

• +12V ignition terminal 15
• +12V lighting terminal 58
• +12V Reverse signal
• Speed signal
• Load capacity of total outputs: 200 mA max.
• Load capacity of individual outputs: 180 mA. max
• Current requirement greater than 180 mA:
• 1 relay coil resistance 75 Ohm min.
• 2 relays coil resistance 150 Ohm min.
• Steering wheel remote control
• Date/time settings not supported on all vehicles

*Vehicles with Visteon OEM device +12V continuous current (terminal 30) adjust pin 4 > Pin 7

General installation instructions:

Check:

1: Check all operating functions and vehicle setting functions of the OEM device
2: Dismantle the OEM device without power supply
3: Check all interface connections for correctness and continuity without power supply

Connection and Connection sequence:

1: Make the settings and hardware configuration of the interface without voltage
2: Check the configuration of the radio connection cable
3: Connect the radio connection cable according to the operating instructions for the retrofit device
4: Connect all other connections according to the operating instructions for the retrofit device
5: Connect the entire installation to the vehicle with a live connection last
6: Configure the software of the interface according to the instructions in the article text and in the BDA
7: Configure the retrofit device according to the operating instructions for the retrofit device steering wheel remote control/camera/FSE/antenna phantom power and others
8: Test the function of the steering wheel remote control and Vehicle

Changes to the hardware configuration of the interface and the radio connection cable:

1: Make changes without power supply
2: Connection after change see above 5 to 8

If the interface or the vehicle malfunctions:

1: Revert to the OEM device
2: Operating the OEM device
3: Establish CAN bus rest
4: Check the hardware configuration of the interface
5: Connection after CAN bus rest, see above 5 to 8
Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are intended solely for orientation and information for trained specialist personnel.

Other connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:

1: Connections and changes may only be carried out by trained specialist personnel
2: Before connecting, connections and changes must be checked for any manufacturer approvals or for any components that may be affected by the changes. Manufacturer's warranty conditions must be checked
3: Connections and changes must be checked for functionality and correctness before connection by measuring and comparing them with the vehicle's cable assignment plan
4: Connections and changes are made at your own risk and without a guarantee of functionality
5: Connections and changes are made at your own risk and without a guarantee of damage to the vehicle, the retrofit device or the interface
6: Changes to the pre-assembled wiring harness can void the product's warranty