ACV 771292-1031 - Rear view camera adapter for Suzuki OEM camera 5Pin/4Pin

Rear view camera Adapter Suzuki

Rear view camera adapters are required to maintain the OEM rear view camera.
These enable the connection of a factory-fitted camera to a retrofit device with a camera input.
Depending on the vehicle and equipment, the adapter provides the cinch video signal, a power supply +6V/ground for the OEM camera and the +12V reversing signal or this must be connected to a suitable location in the vehicle.
Vehicles with a 360° camera system or systems with moving guide lines may not be compatible.
Before installation, check that the adapter is correctly connected to the OEM connection.
Many retrofit devices must be set to the camera function in the menu.

For the following Vehicles:

• Suzuki Ignis (MF) 01/2017 - 04/2021
• Suzuki Ignis (MF) 04/2021 - 2023
• Suzuki Jimny (GJ) 10/2018 - 09/2020
• Suzuki Jimny. NFZ (GJ) 04/2021 - 2023
• Suzuki Swift (AZ) 04/2017 - 2023
• Suzuki SX4 S-Cross (JY) 10/2013 - 10/2016*
• Suzuki SX4 S-Cross (JY) 10/2016 - 12/2021
• Suzuki Vitara (LY) 04/2015 - 08/2018
• Suzuki Vitara (LY) 10/2018 - 2023

*Vehicles with Garmin OEM Navigation 1 rotary control on the left

General installation instructions:

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for orientation and information purposes only for trained personnel. Qualified personnel.

Additional connections, changes to the cable configuration of the wiring harness or use of alternative connections or Connection extensions:

1: Connections and changes may only be carried out by trained specialist personnel
2: Connections and changes must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the changes before connection
3: Connections and changes must be checked for function and correctness before connection by measuring and comparing them with the vehicle's cable assignment plan
4: Connections and changes are made at your own risk and without guarantee of function
5: Connections and changes are made at your own risk and without guarantee for damage to the vehicle, the retrofit device or the interface
6: Changes to the pre-assembled wiring harness can void the product's warranty