Caraudio-Systems - RL-MFD3 - RGB converter for camera (RNS510 / RNS810 / RCD510 / Columbus)

The r.LINK interface enables a reversing camera to be connected to the vehicle manufacturer's factory navigation system.

Product features

- Plug and play interface
- Integration in the factory infotainment
- Rear view camera input (NTSC cameras only)
- Reversing camera image reproduction up to approx. 5 km / h
- Automatic switching to rear-view camera input when engaging reverse gear (coding of the head unit required)

Compatibility

- Seat Trinax (at least version B and software version 1100. Must be coded on the diagnostic computer on the reversing camera)
- Skoda Amundsen, Skoda Bolero (suitable for head unit with 26-pin connector on the back. This must be coded on the rear view camera on the diagnostic computer)
- Skoda Columbus (at least version B and software version 1100. Must be coded on the diagnostic computer on the reversing camera)
- VW RNS315, VW RNS510 (with RNS510 at least version B and software version 1100. Must be coded on the diagnostic computer on the reversing camera)
- VW RCD510, VW RNS310 (suitable for head unit with 26-pin connector on the back. This must be coded on the rear view camera on the diagnostic computer)
- Only for vehicles WITHOUT factory rear view camera.

Limitations

- Factory TV tuner: Must NOT be installed
- After-market rear-view camera: only NTSC cameras compatible
- Coding: The head unit must be coded using a diagnostic computer on the rear-view camera. This is possible for RNS510 / Columbus / Trinax and RCD510 through our optionally available OBD encoder OBD-VW-R-xx.
- OPS: In vehicles with OPS (optical parking system), the OPS control unit must be coded using a diagnostic computer on the reversing camera.

Technical data (interface box)

- Voltage working range: 10.5 - 14.8V
- Quiescent current: 0mA
- Working current: 200mA
- Power consumption: 2.8W
- Temperature range: -30 ° C to + 80 ° C
- Weight: 53g
- Dimensions: 72 x 23 x 50mm (W x H x D)