Product information NAVLINKZ video feeder (no sound) for VW, Seat, Skoda with MIB

v.LiNK 2 video+RFK+RGB input VW MIB STD2 PQ/+Nav (only vehicles without DAB+)
v.LiNK video feeder for VAG vehicles with MIB STD2 PQ/+Nav with 6.5 inch monitor, one SD slot vertically on the left or one SD slot each vertically on the left/right and CD drive above the monitor (drive only Seat and VW).
For connecting any two video sources (retrofit devices e.g. DVD player, DVB-T tuner), an RGB source and a rear view camera.
Product features

•  Video feeder
•  2 video inputs for retrofit devices (e.g. DVD players, DVB-T tuners,...)
•  Rear camera video input
•  automatic switching to rear view camera input when engaging reverse gear
•  Distance lines for rear view camera can be activated
• RGB video input for after-market navigation
•  Image activation while driving (ONLY for fed-in video)
•  compatible with factory rear view camera
•  AV inputs PAL/NTSC compatible

Compatibility
Compatible with VAG vehicles with MIB STD2 PQ/+Nav with 6.5 inch monitor, one SD slot vertically on the left or one SD slot each vertically left/right and CD drive above the monitor (drive only Seat and VW).
Designations: Skoda Bolero and Amundsen. Seat Media System Plus. VW Composition Media and Discover Media.
Installed in the following vehicles, among others

•  Seat Alhambra
•  Skoda Yeti
•  VW Golf Active Van
•  VW Sharan
•  VW T6
•  VW Tiguan

Limitations
Video only
The interface ONLY feeds video signals into the infotainment. To feed in audio signals, a possibly existing factory audio AUX input or an FM modulator can be used.
Factory rear view camera
Automatic switchover to RFK, only as long as reverse gear is engaged. Additional electronics are required to delay the downshift.
The interface is installed in the monitor board (the monitor must be opened for this!).
Technical data (video interface)

•  Working voltage: 7V - 25V
•  quiescent current: <10mA
•  Power consumption: 4.8W
•  Video input: 0.7V1V
•  Video input formats: PAL/NTSC
•  RGB video amplitude: 0.7V with 75 ohm impedance
•  Temperature range: -40°C to +85°C
•  Weight: 342g
•  Dimensions: 158 x 22 x 92 mm (W x H x D)