5% discount
Prices incl. VAT plus shipping costs
available,
Delivery time appr. 1-2 working days
- Order number: 02055IKW6
- EAN 4057204332709
HELIX IK W6
Rich deep bass from compact dimensions
The chassis of the IK subwoofer series enable use in very compact housings in which they play grandiosely with extraordinary bass performance. Especially when it comes to making optimal use of the available space in the vehicle with an individual subwoofer housing shape, these woofers open up completely new possibilities without having to make acoustic compromises.
Clever down to the last detail
The extremely hard membrane made of hand-made paper fibers in combination with the heavy-duty drive system not only converts amplifier power casually and without compression effects into powerful sound pressure, but also scores points in terms of sound with subtle beats.
Flexible connector
Due to the design as a 1 x 2 ohm (SVC2) or 2 x 2 ohm (DVC2) variant, the right low-bass specialist can be found for every amplifier configuration in order to be able to get the maximum performance out of it.
"All inclusive" for the do-it-yourself
For optimal bass performance with DIY installations, our technical data sheet contains recommendations for closed and bass reflex enclosures with all parameters such as net volume, tunnel tuning frequency and DSP settings.
A solid protective grille and a cover ring are of course included in the Included in delivery.
Features
- 2 x 2 ohm dual voice coil for flexible system configurations
- Powerful magnet system optimized for compact bass reflex housing
- Enormously torsion-resistant, handmade paper cone
- Dual ventilation of the voice coil for minimal compression effects and high resilience
- Long-travel rubber surround for maximum mechanical resilience
- Gold-plated connection terminals for maximum conductivity
- Robust magnet cover with HELIX lettering to protect the magnet
- Grid and cover ring included
Specifications
| IK W6-DVC2 - 2 x 2 ohms | ||
| RMS / Max. | P | 150 / 300 watts |
| Impedance | Z | 2 x 2Ω |
| DC resistance | Re | 2 x 2.0Ω |
| Resonance frequency | Fs | 50Hz |
| Mechanical Quality | Qms | 3.92 |
| Electrical Grade | Qes | 0.32 |
| Overall quality | Qts | 0.30 |
| Compliance | Cms | 261 μm/N |
| equivalent volume | Vas | 5.3L |
| Power Factor | B*I | 12.3 Tm |
| Efficiency | SPL | 89.0dB @ 2.83V / 1m 86.0dB @ 1W / 1m |
| membrane area | Sd | 123 cm² |
| Moving Mass | Mms | 37g |
| Membrane Material | Handmade Paper Cone | |
| Mechanical resistance | Rms | 3.04kg/s |
| Voice coil diameter | ø | 37mm |
| Voice coil winding width | 18mm | |
| Max. linear diaphragm stroke | Xmax | +/- 6.0mm |
| Outside diameter | ø | 164.2mm |
| Installation diameter | ø | 132.5mm |
| Installation depth | 74.3mm | |
| Housing recommendation | ||
| Bass reflex enclosure | ||
| Net volume | 7L | |
| Reflex channel diameter | ø | 50mm |
| Reflex Channel Face | 20 cm² | |
| Reflex channel length | 34 cm angled | |
| Tunnel tuning frequency | Fb | 45Hz |
| Lower cutoff frequency (-3dB) | 43Hz | |
| Recommended DSP Settings | Recommended "Self-Define" high-pass filter with 45 Hz cutoff frequency and Q = 1.2; Additional EQ filter 80 Hz / Q = 1.0 / +1 .0dB |
Scope of delivery
1 x subwoofer HELIX IK W6-DVC2
1 x grille
1 x cover ring
1 x data sheet
| quantity: | 1 piece |
| Impedance (in Ohm): | 2 x 2 |
| Peak Power (in Watt): | 300 |
| Power RMS (in Watt): | 150 |
| Product group: | Spare Wheel Hollow |
