5% discount
Prices incl. VAT plus shipping costs
available,
Delivery time appr. 1-2 working days
- Order number: 02055IKS12
- EAN 4057204333317
HELIX IK S12
With the HELIX IK S subwoofers, the realization of particularly flat and compact housing designs is no longer a problem. The extremely low installation depth opens up new installation options that do not require any acoustic compromises. Above all, thanks to the use of large voice coils and the low resonance frequency, the HELIX IK S series delivers an absolutely superior bass performance, which is in no way inferior to larger woofers.
In love with detail and well thought out
The enormously torsion-resistant sandwich paper cone in conjunction with our heavy-duty drive system converts amplifier power without compression effects into powerful sound pressure in no time at all, but also demonstrates sensitivity with subtle beats.
Special highlight: The magnet system has a threaded hole on the back and enables the woofer to be screwed to the rear panel of the housing. Since every millimeter of overall depth counts in flat constructions, housing vibrations are effectively reduced even with thin walls.
Flexible connection
Due to the design as a 1 x 2 ohm (SVC2) or 2 x 2 ohm (DVC2) variant, the right low-bass specialist can be found for every amplifier configuration in order to be able to get the maximum performance out of it.
"All inclusive" for self-made enthusiasts
In addition to the high-quality housing connection terminal with gold-plated screw connections, a solid protective grille and a cover ring are also included in the scope of delivery. For optimal bass performance with DIY installations, our technical data sheet includes recommendations for closed and bass reflex cabinets with all parameters such as net volume, tunnel tuning frequency or DSP settings.
Features
- Chassis with particularly low installation depth - optimized for compact and very flat housing constructions
- 2 x 2 ohm dual voice coil for flexible system configurations
- Magnet system with threaded hole on the back - enables screwing to the rear wall of the housing for stabilization and reduction of housing vibrations
- Enormously torsion-resistant sandwich paper cone
- Long-travel rubber surround for maximum mechanical resilience
- Robust magnet cover with HELIX lettering to protect the magnet
- Housing terminal, grille and bezel included
Specifications
| IK S12-DVC2 - 2 x 2 ohms | ||
| RMS / Max. | P | 300 / 600 watts |
| Impedance | Z | 2 x 2Ω |
| DC resistance | Re | 2 x 1.8Ω |
| Resonance frequency | Fs | 36Hz |
| Mechanical Quality | Qms | 5.41 |
| Electrical Grade | Qes | 0.52 |
| Overall quality | Qts | 0.48 |
| Compliance | Cms | 95 μm/N |
| equivalent volume | Vas | 40L |
| Power Factor | B*I | 17.2 Tm |
| Efficiency | SPL | 91.0dB @ 2.83V / 1m 88.0dB @ 1W / 1m |
| membrane area | Sd | 523 cm² |
| Moving Mass | Mms | 220g |
| Membrane Material | sandwich paper cone | |
| Mechanical resistance | Rms | 7.9 kg/s |
| Voice coil diameter | ø | 50.8mm |
| Voice coil winding width | 24mm | |
| Max. linear diaphragm stroke | Xmax | +/- 8.0mm |
| Outside diameter | ø | 316mm |
| Installation diameter | ø | 276.8mm |
| Installation depth | 95.5mm | |
| Recommended Enclosure Volumes | ||
| Closed case | ||
| Net volume | 22 L | |
| Lower cutoff frequency (-3dB) | 39Hz | |
| Recommended DSP Settings | Recommended "Self-Define" high-pass filter with 35 Hz cutoff frequency and Q = 1.5 Additional EQ filter 75 Hz / Q = 1.5/ -3 dB | |
| Bass reflex cabinet | ||
| Net volume | 40 L | |
| Reflex channel diameter | ø | 100mm |
| Reflex Channel Face | 78 cm² | |
| Reflex channel length | 32 cm | |
| Tunnel tuning frequency | Fb | 36Hz |
| Lower cutoff frequency (-3dB) | 37Hz | |
| Recommended DSP Settings | Recommended "Self-Define" high-pass filter with 36 Hz cutoff frequency and Q = 1.0 Additional EQ filter 75 Hz / Q = 0.7 / -2 dB |
Scope of delivery
1 x subwoofer HELIX IK S12-DVC2
1 x grille
1 x cover ring
1 x housing connection terminal
1 x data sheet
| quantity: | 1 piece |
| Diameter (in cm): | 30,0 |
| Impedance (in Ohm): | 2 x 2,0 |
| Peak Power (in Watt): | 600 |
| Power RMS (in Watt): | 300 |
| Product group: | Spare Wheel Hollow |
| Subwoofer Features: | double membrane |
