Rockford Fosgate POWER TM1000x5 AD - 5-Kanal Verstärker Marine

Power Marine 1000 watt Class-Ad 5-channel amplifier

The Power Marine TM1000x5ad is a compact 1000 watt multichannel class amplifier. It features high-level, high-level auto power-on differential inputs, a CLEAN circuit with input / output clip detection, top-mounted controls, and forced induction cooling with two fans.

The TM1000X5ad Element Ready Multichannel Amplifier is a 1000 watt RMS device based on our proprietary class display platform that offers unprecedented sound quality with superior energy efficiency. In combination with our constant power technology, this amplifier can easily exceed its rated power by up to 25% additional power per channel. The controls mounted on top of the amplifier include our CLEAN level adjustment system, built-in high / low pass crossovers, configuration switches for the input channel and our Punch EQ boost circuit.

Improved RCA input connectors allow high or low level input signals to be used through our differential input circuitry, eliminating incoming interference and providing a remote output signal when using high level inputs. Double fan cooling, real-time heat monitoring and two extruded heat sinks ensure heat dissipation, even at high powers, which keep the amplifier cool. Further features include a conformal coated circuit board to protect elements from exposure and to be compatible with our SPS2 remote control for the sub-channel.

• Rockford Fosgate proprietary Class AD technology
• Class bd technology
• Differential inputs with high-level auto switch-on function
• AP remote out function when using high-level inputs
• 4/2 ohm multi-impedance constant power
• 2013 PLC2 remote control ready
• CLEAN input / output clip detection and indicator LEDs
• Controls mounted on top
• Double fan cooled
• Real-time thermal acquisition
• Double extruded heat sinks
• All other Rockford protection systems
• CEA-2006 and CE compliant
• Discrete surface mount technology
• Marine grade two-part epoxy coating on circuit boards

Specifications

CEA-2006-compliant: CEA-2006 nominal power 100 W x 4 + 400W x 1 at 4 Ohm ≤ 1.0% THD + N.

Number of channels: 5

Power max .: 2000 watts

Power RMS: 1000 watts

• 100 watts x 4 at 4 ohms
• 200 watts x 2 at 4 ohms bridged + 400 x1 at 4 ohms
• 100 watts x 4 at 2 ohms + 600 x 1 at 2 ohms + 600 watts x 1 at 1 ohm
• bridgeable

Frequency response: 20 Hz - 20 kHz +/- 1 dB

Input sensitivity: 150 mV to 12 V.

Circuit topology class: Class AD + Class BD (Sub

Efficiency (average):> 85%

Total Harmonic Distortion (THD + Noise): N / A

Signal input:

Front high / low input: 4-pin wiring harness

Rear High / Low input: 4-pin wiring harness

Input switch: 2CH / 4CH (2CH: sub-signal derived from front left input)

Signal output: N / A

Sound control:  

• Front / rear treble: 0 to +14 dB at 12.5 kHz (HP mode)

• Front / rear bass: 0 to +18 dB at 45 Hz (LP mode)
• Sub: 0 ​​to +18 dB at 45 Hz
• High pass: 50 Hz - 250 Hz at 12 dB / octave
• Low pass: 50 Hz - 250 Hz at 12 dB / octave
• Subwoofer: 50 Hz - 250 Hz at 12 dB / octave

Crossover:

• Infrasound: 28 Hz at 12 dB / octave
• Butterworth registration at all

Remote controls: The optional SPS2 offers a punch level control

Visual indicators:  

• Power: Blue LED
• Protect: Red LED
• Input clip: Red LED3
• Output clip: Blue / Purple / Red LED1,2,3

Power Wire Gauge: 4 AWG

Power input connection: Removable compression terminal

Speaker cable indicator: Front / Rear: 16 AWG - Sub: 10 AWG

Speaker output connector:

• Front: 4-pin wiring harness
• Rear: 4-pin wiring harness
• Sub: Removable compression terminal

Cooling: Dual fan cooled with heat sink

Operating voltage: 9-16 VDC

Recommended fuse: 100A (not included)

Average power consumption (13.8V music): N / A  

Dimensions (H x W x D): 4.1 x 10.8 x 30.5 cm