5% discount
Prices incl. VAT plus shipping costs
Ready to ship,
Delivery time appr. 1-3 Workdays
- Order number: 02055M111005
- EAN 4057204614430
MATCH UP 10DSP – 24V Edition
The premium sound upgrade for 24 volt multi-channel factory systems
The new UP 10DSP - 24V Edition is a real problem solver for upgrading sound systems in the truck and bus sector, especially thanks to its 24 volt capability. Even though more and more vehicles are equipped with complex multi-channel sound systems ex works, the sound quality does not always meet your expectations.
In many cases, replacing existing components is no longer possible, so all you need to expand is an amplifier with one large number of high-level inputs and sophisticated technology comes into consideration. And here the new UP 10DSP - 24V Edition offers the perfect solution.
Maximally sociable
For optimal adaptation to existing multi-channel sound systems, the UP 10DSP - 24V Edition is no less than 8 high-level inputs (two with a high load capacity of up to 32 V), an optical digital input, a MATCH extension card slot, 10 amplifier outputs and a total of 11 processed DSP channels.
In addition, intelligent technologies such as the proprietary ADEP ensure. 3 circuit and the 32-bit ACO platform, secure operation.
Virtual Channel Processing - this is how signal routing works today
The adaptation to modern factory sound systems is increasing The number of signal inputs means that increasingly complex signal routing in the amplifier is unavoidable. Especially when several input signals are mixed together and then broken down into multi-way systems, traditional routing concepts quickly reach their limits. Audiotec Fischer's new, multi-stage "Virtual Channel Processing< /a>" makes it possible, in conjunction with the recognized user-friendly DSP PC tool software, to easily map even highly complex system configurations and to use the proprietary FX sound features such as "RealCenter" or "Dynamic Bass Enhancement " to be able to assign freely. But the UP 10DSP – 24V Edition is thanks to its enormous number of channels in conjunction with the optional MEC ANALOG IN Module is also a prime example of applications where a 1 to 1 Routing (IOR) makes sense.
Speed is everything - thanks to ACO
Such a huge number of channels requires ultra-fast hardware - Audiotec Fischer's proprietary 32-bit ACO platform takes over all control tasks and ensures plenty of speed, especially when communicating with our DSP PC tool software, but also with lightning-fast switching between up to ten possible sounds Setups. The fantastic sound effects associated with the ACO platform such as Augmented Bass Processing, StageXpander or RealCenter are just as obvious with the UP 10DSP - 24V Edition as an 8-channel input EQ including input signal analyzer (ISA) for easy analysis and compensation of the input signals OE radios.
Power package in a compact format
Despite the concentrated power of 8 x 65 at 4 ohms and 2 x 90 / 160 watts at 4 / 2 ohms on the sub out and the With its enormous range of functions, the UP 10DSP - 24V Edition comes in an extremely compact design, so that installation is possible even in confined spaces.
Features
- Highly efficient 10-channel amplifier with 1-channel line output and 11-channel DSP
- Specially developed for upgrading multi-channel factory sound systems in trucks and buses thanks to 24 volt capability
- Optional wiring harnesses for easy integration into existing multi-channel factory sound systems
- Extremely powerful 64 Bit "Fixed Point" Audio DSP
- ACO - Advanced 32 Bit CoProcessor platform for system and DSP features:
- ISA (Input Signal Analyzer) and InputEQ for easy Analysis and compensation of the input signals
- SFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.
- Heavy-duty 8-channel high-level input with ADEP.3 circuit - including two inputs with up to 32 V RMS input sensitivity
- 1:1 IOR (Input -to-Output Routing) in conjunction with the optional MEC ANALOG IN Module - same number of high-level inputs and amplifier channels
- VCP (Virtual Channel Processing) enables highly complex sound systems to be configured even more flexibly
- MEC slot for system expansions such as Bluetooth®Audio streaming, high resolution audio streaming via USB etc.
- Optical SPDIF input with a sampling rate between 12 and 96 kHz
- Mono RCA output for connecting additional amplifiers, e.g. a subwoofer amplifier
- SCP (Smart Control Port) for optional accessories, such as DIRECTOR, CONDUCTOR & Co.
- Auto Remote Switch
- Start-stop capability down to 12 volt supply voltage
- Extremely compact dimensions and low heat generation thanks to very high efficiency < /ul>
Special features
Class GD technology
Audiotec Fischer's unique Class GD concept combines the advantages of Class G technology using the principle of a Class D amplifier.
This results in an unusually high level of efficiency that even surpasses conventional Class D amplifiers. The Class GD concept shows its advantages at low and medium levels by gradually varying the internal supply voltage of the power stages depending on the amplitude of the input signal. This drastically reduces the average power loss generated by the amplifier.
ACO - Advanced 32 Bit CoProcessor
The MATCH UP 10DSP - 24V Edition amplifier is used for all internal and external control and Communication tasks require a particularly powerful 32-bit CoProcessor of the latest generation. In contrast to the 8-bit processor used previously, this results in significant speed advantages not only when switching between different sound setups but especially in data communication with our DSP PC tool software. Another significant advantage is the CoProcessor's integrated, native bootloader. This enables software upgrades of all components of the DSP, for example in order to be able to adapt the microcontroller-controlled ADEP.3 circuit to future changes in diagnostic systems of factory radios or to expand the device with additional interfaces. In addition, thanks to the new flash memory, the ACO offers space for 10 sound setups instead of the usual two.
Intelligent high-level input ADEP.3
Modern, factory-installed car radios are used for diagnosis the connected speakers are becoming increasingly intelligent. The latest generation in particular is equipped with additional monitoring functions, so that error messages or even malfunctions can occur when an additional amplifier is connected. The new ADEP.3 circuit (Advanced Diagnostics Error Protection Generation 3) prevents these problems without unnecessarily loading the radio's speaker outputs at high levels.
Start-stop capability
The power supply in UP 10DSP - 24V Edition amplifier ensures the internal power supply even in the event of short-term drops down to 12 volts. This ensures that the amplifier remains fully functional even when the engine is started. If the on-board voltage falls below 21 volts for longer than 5 seconds, the amplifier goes into “Protect Mode” (status LED lights up red permanently) to prevent further battery discharge.
Automatic Digital Signal Detection
The UP 10DSP – 24V Edition allows signal-controlled switching between the analog and digital inputs. As soon as an audio signal is detected at the optical input, the amplifier switches to this input. This function can be activated in the DSP PC-Tool software or alternatively manual control can be selected using an optionally available remote control.
Power Save Mode
The Power Save mode is permitted The aim is to drastically reduce the power consumption of the UP 10DSP – 24V Edition (and any additionally connected amplifiers) if there is no input signal for longer than 60 seconds. As soon as the “Power Save Mode” is active, the internal amplifier stages of the UP 10DSP – 24V Edition as well as the remote output are switched off, thus significantly reducing the power consumption. The amplifier returns to normal operating mode within 2 seconds as soon as a music signal is present at its input. The switch-off delay can be varied or completely deactivated using the DSP PC tool software.
Note: The Bluetooth® word mark and the Logos are registered trademarks of Bluetooth SIG, Inc. and any use of these trademarks by Audiotec Fischer GmbH is under license. Other trademarks and trade names belong to their respective owners.
DSP Features
TuneEQ
TuneEQ is an extremely flexible and particularly easy-to-use function for automated frequency response correction. A single measurement per respective audio channel or channel pair with a suitable measurement microphone (such as our MTK1) is enough for TuneEQ to independently and precisely adapt the equalizer to the desired reference curve. TuneEQ uses the full range of functions of the parametric equalizer, including the center frequency, the Q factor and the gain. And because the highly complex calculation operations required for this take place in the background, you also save a lot of time when tuning sound with TuneEQ.
RealCenter
The “RealCenter” function is a proprietary one Audiotec Fischer algorithm that highlights the monaural information of the left and right front channels to create a unique center signal. In contrast to usual methods in which the channels are simply summed up, here there is also dynamic control of the center signal through the stereophonic information content of the left and right channels. This means that the center channel does not reproduce a signal if only the left or only the right channel delivers an audio signal. With usual algorithms, the center channel would only be 6 dB quieter in this case. Audiotec Fischer's “RealCenter” enables a unique, wide-ranging stage image - and is optimal for driver and passenger alike! The disadvantages of a conventional center channel, such as an intrusive, narrow spatial sound representation, are finally a thing of the past.
Augmented Bass Processing
Audiotec Fischer's proprietary “Augmented Bass Processing”, consisting of the two revolutionary sound features: “Dynamic Bass Enhancement” and “SubXpander”. These have been specially developed to dramatically improve the bass reproduction of subwoofers.
"Dynamic Bass Enhancement" ingeniously combines maximum deep bass foundation and high maximum sound pressure - regardless of the type of music you are listening to or the sound settings on the radio. Depending on the input signal, “Dynamic Bass Enhancement” amplifies the lower frequency range on the one hand and varies the cutoff frequency of the subsonic filter on the other. The result is a much more powerful, deeper bass reproduction at low and medium volumes without the risk of mechanically or electrically overloading the subwoofer at high volumes. It's simply fascinating what bass performance is suddenly possible.
If you want the low frequency range to be a little deeper and "blacker", you can also activate the "SubXpander". Here, additional subharmonic tones are mixed into the basic tones in the frequency range between 50 and 100 Hz.
Technical data
< /div>| UP 10DSP – 24V Edition | |
| Power RMS | |
| - @ 4 Ohm | Channel A - H: 8 x 65 watts (min. 3 Ohm) |
| - @ 2 Ohm | -< nonbreakingspace/> |
| - @ 1 Ohm | -< nonbreakingspace/> |
| - bridged to 4 ohms | - |
| - bridged to 2 ohms | - |
| - Subwoofer output at 4 ohms | Channel I - J: 2 x 90 watts |
| - Subwoofer output at 2 ohms | Channel I - J: 2 x 160 watts |
| Amplifier technology | Class GD |
| Inputs | 8 x high level speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Remote In |
| Input sensitivity | Channels A - F: 4 - 16 volts Channels G - H: 4 - 16 or 8 - 32 volts |
| Input impedance RCA | - |
| Input impedance Highlevel | 9 - 33 Ohm with ADEP.3 |
| Outputs | 10 x speaker output 1 x RCA 1 x Remote Out |
| Output voltage RCA | 3 volts< /td> |
| Frequency range | 10 Hz - 22,000 Hz |
| DSP resolution | 64 Bit |
| DSP computing power | 295 MHz (1.2 billion MAC operations/second) |
| Sample rate | 48 kHz |
| DSP type | Audio signal processor |
| Signal converter< /strong> | A/D: BurrBrown D/A: BurrBrown |
| Signal/noise ratio digital input | 105 dB (A-weighted) |
| Signal/noise ratio analog input | 103 dB ( A-rated) |
| Total Harmonic Distortion (THD) | < 0.03% |
| Damping factor | > 100 |
| Operating voltage | 18 - 36 volts (max. 5 seconds down to 12 volts) |
| Power consumption | DC 24 V ⎓ 32 A max. |
| Idle current consumption | 210 mA |
| Max.Remote output current | 500 mA |
| Operating temperature range | -40° C to +70° C |
| Fuse | 2 x 25 A LP mini plug-in fuse |
| Additional features | Class GD technology with dynamically controlled power supply, 32 bit CoProcessor, ADEP.3 circuit, start-stop capability, Smart Control Port, USB, MEC slot, auto remote switch, galvanically isolated line out |
| 46 x 145 x 163 mm |
Compatibility
Only for operation on 24 volt electrical systems
Scope of delivery
1 x MATCH UPGRADE amplifier UP 10DSP – 24V Edition
2 x connection cable
1 x mounting plates & -material
1 x USB cable
1 x user manual
| quantity: | 1 piece |
| Housing color: | black |
| Impedance (in Ohm): | 2,0 |
| Channels: | 10 |
| Power RMS (in Watt): | 540 |
| Product group: | Amplifier |
| Amplifier Features: | 24V compatible, Autosense, bass remote (optional), digital, integrated DSP, High-Level-Input |
