RetroSound MOTOR-7 - DAB + radio module for "Santa Barbara"

The article "MOTOR-7" is the radio module with all cables and accessories but without the display unit. The display unit, the control knobs and the rear control rings must be ordered separately.

It has a Bluetooth handsfree with A2DP audio streaming. Of course, the "MOTOR-7" radio module also has the flexible "InfiniMount" mounting system and operating controller patented by RetroSound. With this device, you get the design of your classic and do not have to do without modern digital media. Two USB and two AUX inputs on the back panel allow you to play external audio players.

Any concerns that your H license plate might be at risk due to the installation of a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the Retro Sound Model Zuma "and the Retro Sound Model Two" including vehicle-specific aperture and control knobs may be installed in vintage cars with H license plate or not prevent the award of the H license plate!

domestic equipments

• Playback of MP3 and WMA files via the rear USB input
• Bluetooth handsfree with A2DP audio streaming
• Adjustable LCD lighting with 32,000 different colors
• DAB + / FM / MW radio receiver with RDS and 30 stations memory
• Tuner with European even and odd radio frequencies
• Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
• 2 stereo RCA outputs for external amplifiers (front / rear)
• 2 years manufacturer warranty
• 3 equalizer programs plus individual bass / treble / fader / balance adjustment
• E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00
• XBAS loudness function

expansion options

• 1 USB inputs (rear of device) up to max. 32GB
• 2 AUX inputs (stereo)
• 2 RCA outputs (stereo) for external amplifiers (front / rear)
• Separate switch-on line for motor antenna and amplifier
• Technical Data Radio Part
• VHF European Broadcasting Frequency range 87.5-107.9 MHz. (0.05 MHz in steps)
• MW Frequency range 530-1710 kHz (9 kHz in steps)
• DAB + reception via SMB antenna input for passive DAB + antennas

General data

• Dimensions radio base 101x51x136mm
• Power supply 10.5 to 14.4 volts
• Maximum current consumption 15 amps
• Quiescent current 3.5 mA
• Output 12V, 4 ohms, <1% distortion: 4x15 watts sine wave
• Impedance speaker 4-8 ohms
• RCA outputs 4 channel 2.85 volts for external amplifiers (front / rear)
• Input sensitivity AUX1> 300 mV / 6 kOhm
• Input sensitivity AUX2> 300 mV / 6 kOhm

E-registration
E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00

Vehicles with 6 volt electrical system
You need a voltage converter if you want to operate a RetroSound car radio in a vehicle with 6 volt electrical system. We recommend the DC / DC converter 2238.0 from Statron (www.statron.de) in such a case.

*Important NOTE
Please order the display unit and control buttons separately for your car. These are not included with the car radio.